Skip to content

How To Use Your AeroPress With the Brewed Within Method

How To Use Your AeroPress
How To Use Your AeroPress

Why AeroPress?

The AeroPress is a simple yet versatile brewing device. It uses immersion and pressure to extract flavour from your coffee grounds, offering a smooth cup with less bitterness and fewer harsh acids compared with some other methods. It also gives you control over grind size, water temperature, brew time and coffee-to-water ratio—all of which let you match your taste preferences, and this coffee brewing ratios and grind size chart provides a quick reference to balance these variables for better extraction.

What You’ll Need: Tools & Ingredients

Ingredients

Key Metrics (for Brewed Within recommended method)

Note: These numbers offer a starting point. You can adjust based on bean strength, roast level or cup size.

Brewing Step-by-Step (Standard Upright Method)

Here’s how you brew using the AeroPress in the standard upright orientation.

Step 1: Heat the Water

Bring your kettle of water to boil, then let it cool slightly so it reaches approximately 92 °C. If your kettle doesn’t show temperature, let it sit ~30 seconds after boiling for a good approximation.

Step 2: Grind Your Coffee

Weigh out 14 g of coffee beans. Set your grinder to a medium-fine setting (a bit finer than “drip” but coarser than espresso). For example, one guide recommends medium-fine for AeroPress. Grind beans just before brewing for freshness.

Step 3: Prepare the AeroPress

Step 4: Add Coffee

Pour your 14 g of ground coffee into the AeroPress chamber. Give the chamber a slight shake to level the grounds for even extraction.

Step 5: Start Brewing

Start your timer. Pour hot water (200 ml) into the chamber within about 10 seconds. Wet all the grounds evenly. Use a circular pour or fill to just below the top.

Step 6: Stir and Seal

At ~30 seconds, use the stir-stick to stir the mixture gently for a few seconds, ensuring even saturation. Then at ~1 minute mark insert the filter cap if not already and gently swirl the chamber to mix.

Step 7: Plunge

At ~1 minute 30 seconds, slowly plunge the AeroPress down into the mug. Apply steady pressure until you hear a faint hiss, which signals nearly all liquid has been pushed through the filter. The total brew time is about 1:30.

Step 8: Finalise & Serve

Remove the AeroPress, give your mug a gentle swirl, sniff the aroma, and enjoy your fresh AeroPress coffee from Brewed Within. If your cup is too strong, add a little hot water to taste. If too weak, adjust coffee dose or grind in next brew.

Tips for a Better Cup

Here are some pro tips to refine your brewing and troubleshooting ideas:

Why This Works for Brewed Within

At Brewed Within, we want you to experience the true flavour of our beans—from origin, roast, to cup. This AeroPress method emphasises clarity, balance and flavour purity instead of heavy body or overly strong extraction. The tools, ratios and timings support:

  • A clean flavour profile—minimal bitterness or harsh acidity.
  • Flexible strength—brew a potent shot or top-up with hot water for a lighter cup.
  • Quick brewing—about 2 minutes total from grind to pour.
  • Easy clean-up—AeroPress is portable and simple to rinse out after use.

Troubleshooting Quick Guide

Issue

Likely Cause

What to Adjust

Cup tastes too weak/watery

Not enough coffee or too much water, or grind too coarse

Increase dose to ~16 g, decrease water, or fine the grind one step

Cup tastes too bitter/over-extracted

Grind too fine, brew time too long, water too hot

Use coarser grind, shorten brew time, reduce water temp

Pressing is hard or slow

Grind too fine or too much coffee causing tight resistance

Coarsen grind, reduce coffee dose

Pressing is too easy/fast

Grind too coarse or extraction too quick

Fine grind or increase dose

Different taste than expected for same beans

Inconsistent dose, water temp, grind or brew time

Use scale & timer, maintain variables constant for repeatability

Variations You Can Try (After You Master This)

Once you’re comfortable with the base method, you might branch out:

  • Inverted method: Start AeroPress upside down, brew, then flip and plunge. This can allow longer immersion and richer body.
  • Different ratios: Try 17 g coffee / 220 ml water for a bit more fullness. One guide uses 17 g / 220 ml / 1:15 ratio.
  • Metal filter: Use a reusable metal mesh filter instead of paper to allow more oils and body in the cup.
  • Cold brew concentrate: Use AeroPress with cool water, longer steep time, then dilute. (Note: not part of standard thermal brew.)

How To Use Your AeroPress

Welcome to this easy-to-follow guide for the AeroPress coffee maker—tailored for the Brewed Within brand coffee experience. Whether you're new to AeroPress brewing or want a clean, consistent method, this guide covers tools, ingredients, and step-by-step instructions you can follow at home. Let’s get brewing!
Course: Drinks
Servings: 150 ml

Equipment

  • AeroPress coffee maker (chamber + plunger + filter cap)
  • Paper filters (or a reusable metal/mesh filter, if you prefer)
  • Coffee grinder (preferably a burr grinder for consistency)
  • Scale (digital, to weigh coffee and water)
  • Timer or stopwatch
  • Kettle (gooseneck preferred, for pouring control)
  • Mug or cup
  • Stir-stick (often included with AeroPress)
  • Fresh coffee beans

Ingredients

  • Freshly roasted whole-bean coffee
  • Hot water (just off the boil or at target temperature)
  • Filter(s) for the AeroPress

Instructions

  • Heat Water – Boil and cool to about 92 °C
  • Grind Coffee – Use 14 g of beans, ground medium-fine.
  • Prep AeroPress – Insert and rinse filter, screw cap, place on mug and scale.
  • Add Coffee – Pour grounds into the chamber and level them.
  • Add Water – Start timer, pour 200 ml hot water within 10 seconds to wet all grounds.
  • Stir & Seal – Stir gently at 30 sec, attach plunger at 1 min.
  • Plunge – At 1:30, press slowly until you hear a hiss.
  • Serve – Swirl, taste, and adjust strength with hot water if desired.

Notes

Note: The 200 ml brew will yield about 150–180 ml

FAQs

An AeroPress is a portable coffee maker that brews smooth, clean coffee by combining immersion and pressure. It’s easy to use, quick to clean, and makes consistent results every time.

Use a medium-fine grind, similar to table salt. Too coarse leads to weak coffee, while too fine makes plunging harder and the flavor bitter.

For one cup, Brewed Within recommends 14 grams of coffee to 200 milliliters of water at about 92 °C. You can adjust the ratio for a stronger or lighter taste.

Let the coffee steep for about one minute, then plunge slowly for 20–30 seconds. The total brew time should be around 1 minute 30 seconds.

Bitter coffee usually means the grind is too fine or the water is too hot. Try coarsening your grind and keeping water around 90–94 °C.

Yes! The inverted method lets coffee steep longer before pressing, giving a richer, bolder flavor. Just flip the AeroPress upside down before adding water.

You can use standard paper filters or metal filters. Paper filters produce a cleaner cup, while metal filters allow more oils for a fuller body.

Simply remove the filter cap, push the used coffee puck into the bin, and rinse all parts with warm water. The AeroPress is dishwasher-safe too.

Yes! Brew a concentrated shot using less water, then pour it over ice and top with cold water or milk for a refreshing iced coffee.

Brewed Within’s guide focuses on balance, clarity, and rich aroma—highlighting the natural sweetness and full flavor of freshly roasted coffee beans.

Final Word

The AeroPress is one of the fastest, most flexible ways to brew a single cup of coffee at home, and with the Brewed Within method above you’ll be set up for a clean, consistent, flavourful result. Focus on fresh beans, proper grind, accurate dose, correct brew time, and the rest follows.

Take your time learning your machine, your beans, and your taste. Once dialled in, you’ll enjoy a great cup of AeroPress brewed coffee any day. Happy brewing! ☕

Table of Contents

Fact Checked

At Brewed Within, accuracy is at the heart of everything we publish. Our readers trust us to deliver reliable, evidence-based coffee information — from brewing techniques to equipment reviews — and we take that responsibility seriously. Every article, guide, or review undergoes a rigorous fact-checking process before publication. Our editorial team verifies all data, sources, and product claims using reputable references such as academic journals, industry reports, and verified manufacturer information. We also cross-check technical details like roast temperatures, brewing ratios, and caffeine content to ensure precision. When citing statistics or research, we always link to credible sources so readers can independently review the information. This transparent approach helps us maintain both editorial integrity and reader trust.

To prevent misinformation, we avoid using unverified or secondhand data. Our writers and editors only include details that can be confirmed through first-hand testing, trusted publications, or expert consultation. If a source’s reliability is in question, it is either excluded or clearly labeled as opinion-based. We maintain strict editorial independence, meaning no brand, affiliate partner, or advertiser can influence our content or data presentation. All product performance claims — such as brewing results, bean quality, or flavor notes — are independently tested whenever possible, ensuring that our reviews remain authentic and experience-driven rather than promotional.

Our commitment to factual accuracy doesn’t end once an article is published. We routinely review and update content to ensure ongoing relevance and correctness, especially in areas affected by technological advances, new brewing trends, or updated scientific findings. For example, when a coffee grinder model is discontinued or a manufacturer revises specifications, our editorial team promptly adjusts the content to reflect these updates. We also rely on reader feedback to identify potential inaccuracies. Every correction is documented and timestamped so readers can track when and why information was changed. This continuous improvement process ensures that Brewed Within remains a dependable source of up-to-date coffee knowledge.

If you notice an error, outdated data, or unclear information, we encourage you to contact us directly at editor@brewedwithin.com. We value our community’s input and treat all correction requests with transparency and respect. Once a concern is verified, we correct the information within a reasonable timeframe and include a note explaining the revision. Our goal is to provide a fact-based, trustworthy platform for coffee lovers who seek honest information — not marketing hype. Every update strengthens the accuracy of our content and reaffirms Brewed Within’s commitment to truthful, ethical, and reader-focused journalism.

Why Trust Brewed Within

At Brewed Within, we believe great coffee starts with great information. Our mission is to empower every coffee lover — from curious beginners to experienced baristas — with knowledge that’s accurate, practical, and transparent. Every article, review, and guide is built on hands-on testing, verified sources, and genuine experience. We don’t publish content for clicks; we publish to educate, inspire, and simplify your brewing journey. Whether it’s understanding espresso extraction or choosing the best beans, our writers and editors ensure every claim is backed by evidence, experience, and clarity. We never compromise accuracy for marketing. Our readers deserve honest recommendations, not sales pitches, and that’s exactly what Brewed Within delivers.

Trust also comes from independence. Brewed Within is not owned or controlled by any coffee brand, roaster, or equipment manufacturer. We participate in affiliate programs — like Amazon Associates — but this never affects our editorial judgment. If we recommend a grinder, espresso machine, or bean, it’s because we’ve researched, tested, and stand by its performance. Our content is reviewed and updated regularly to reflect current coffee trends and technology. Transparency is at the center of every recommendation we make, ensuring our readers always receive unbiased insights that serve their brewing goals, not ours.

Behind every Brewed Within article is a team of passionate coffee experts, writers, and editors who live and breathe coffee culture. We spend countless hours testing brewing ratios, experimenting with roast profiles, and comparing equipment under real conditions. Our approach goes beyond reading specs — we grind, brew, taste, and document every experience to provide readers with firsthand insights. We also consult baristas, roasters, and professionals to bring technical accuracy and depth to our content. Each guide is written in plain language, so readers can easily apply what they learn, whether they’re brewing at home or crafting espresso shots in a café.

We earn your trust by being accountable. If we make an error, we fix it. If information changes, we update it. And if a reader questions something, we listen. Brewed Within operates with honesty, consistency, and respect for our community. We welcome feedback and fact-check every suggestion before making updates. Our goal is to remain your most reliable coffee companion — a brand that values truth, craftsmanship, and connection over quick trends. When you read Brewed Within, you’re not just getting content — you’re getting the collective experience of people who love coffee as much as you do.